Everyvalve Ltd
19 Station Close, Potters Bar, Herts, EN6 1TL, UK
T: 01707-642018 F: 01707-646340 E: Sales@everyvalve.com
Counter
Press Release Page
Everyvalve Ltd indicates some of the trends of the week with demands on its varied range of metal and plastics valves and also new products that come available over a some time.
PLASTIC BALL FLOAT VALVE PVC-U
The ball float is connected to a lever arm that is attached to a valve stem. As the water level in the tank rises, the ball float rises with it. This causes the lever arm to pivot, which in turn closes the valve stem and stops the flow of water into the tank. When the water level falls, the ball float descends, which opens the valve stem and allows water to flow into the tank again.
Here are some of the common uses of ball float valves:
- Preventing overflow in tank.
- Regulating water level in various application i.e : aquariums, fountains.
- Water treatment plants.
- Cooling towers.
- Agricultural applications.
- And other applications where it is necessary to maintain a constant water level.
Data Sheet
Jan 2024
​
​
​
​
​
​
​
We take pride in our commitment to delivering high-quality products that meet the stringent standards of the aviation industry
Whether you require valves for new installations, upgrades, or maintenance purposes, you can trust in the quality and dependability of our products. Our team is dedicated to providing exceptional service and support to meet your specific needs and requirements.
Valve in Picture used in Jet A1 service and in accordance with
BS EN ISO 10434 | API 600 |
API 608 | BS EN ISO 17292
Our aviation fuel valves are designed and manufactured to withstand the demands of aviation environments, ensuring optimal performance and reliability
​
Valves Manufactured in accordance with
API 602, API 606, API 600, BS5352, BS1414ISO 15761, ISO 10434, ASME B16.34, MSS SP 144.
​
Nov 2023
Knife Gate Valve
​
​
​
​
​
​
​
​
A knife gate valve is a type of gate valve that uses a sharp metal blade to shear through the flow of fluid. The blade is typically made of stainless steel, and it is inserted into the valve body from the top. When the valve is closed, the blade presses down on a resilient seat, sealing off the flow of fluid.
Knife gate valves are typically used in applications where a tight seal is required, such as in the food and beverage industry, the pharmaceutical industry, and the chemical industry. They are also used in applications where the flow of fluid needs to be controlled precisely, such as in irrigation systems and water treatment plants.
Data Sheet
Ref : 17MEXCI
June 2023
Non return valve which operates best in the vertical position. Good minimum 'hang up' properties. With a strainer it can be a foot valve
Ball Check Valve is:
-
Simple and reliable
-
Low maintenance
-
Low pressure loss
-
Wide range of applications
Data Sheet
Ref : S03P31C30
May 2023
Heavy Steam Solenoid Valves to 2” BSP
Everyvalve offers high pressure air and water solenioid valves up to 80 Bar operation and steam up to 12 bar.
This particularly heavy valve brass bodied valve with SS inner parts is suitable for demanding applications and is readily available in all voltages with options for complying with ATEX zones.
Ref : S15MCSA50-20
Tapped & Lugged Flg PN10/PN16 D.I Butterfly Valve
NBR Liner & Statinless Steel Disk
Everyvalve Ltd has a contract to supply valves for a landfill gas project defining special requirements for sizes up to 200mm from 80mm.
Most valves are to be manually operated and have the possibility to be automated subsequently.
Ref : S18ML9914
December 2022
Three Way PP Ball Valve `L` or T Port - 80mm & 100mm (3” & 4”)
Large Bores for redirecting flows in `L` or `T` Configuration. Manual is the standard operation. Actuators and extension spindles by special request. Suitable for chemicals, water and special application up to 80C.
Ref : 10P60A
D159 Bronze Gate Valve
The Crane D159 Bronze Gate Valve offers a dependable and long service life across a wide variety of applications by virtue of its design and material composition. PN32 Bronze Gate Valve.
Size 1/4" - 3"
Ref : 17M160
November 2022
Eve Pour Taps
¾” BSP IN PP Orange or Black Now to test pressure of 7 Bar used In large aquatics systems for regulating flow control to and from tanks.
Ongoing use since 1993.
Ref : 11P100
Double check Valves
¾” BSP WRAS Approved in Brass rated to 10 Bar operating pressure. For ensuring no flow back contamination of water supplies, by two spring loaded check valves.
Data Sheet
Ref : 17MWRC
Stainless Gate Valves
ANSI 150 Manual Operation for Petro Chem Usage and fuel storage usage where reliability in difficult dangerous environment is essential with Certified supply.
Ref : S16MD150GAVCS
Solenoid Valves
¾” Brass rated up to 12 Bar for water. Used for Solar heating applications in household systems generating warmth in the hose and hot water systems.
Ref : 15ML18
